Complete Waterproofing system for treating dampness on Basement RCC Retaining wall

Dr. Fixit PU Foam Injection is a two component hydrophobic polyurethane pre- polymer & accelerator composition. The system only reacts when it comes in contact with moisture /water, producing a relatively stiff & inert polyurathane foam. It is a quick and temporary expanding grout for sealing of water bearing cracks, cavities and leaks even under high hydrostatic pressure.

Dr. Fixit PU Plain Injection is used for sealing & filling of dry, damp or water bearing cracks. It also serves as horizontal water stop against capillary rising moisture in brickwork, stone work, etc. It has low viscosity, high penetration, quick setting and forms tough & flexible polyurethane rubber after complete chemical reaction.

Dr. Fixit POLYPLUS CP is composed of high quality cement, properly selected & graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a chemically active waterproofing treatment for concrete. Dr. Fixit POLYPLUS CP when mixed with water and applied as a brush coat to concrete, it penetrates deeply into the capillaries of the concrete & protects it against the permeability of water.

Dr. Fixit POLYPLUS CP Admix is a new generation integral crystalline waterproofing admixture which is added to the concrete mix at the time of batching or on site in transit mixer at the time of placing concrete. These active chemicals react with the water in fresh concrete and the by-products of cement hydration to cause a catalytic reaction,which generates a non-soluble crystalline formation throughout the pores and capillary tracks of the concrete.